Detailed Product Description

The Principle of  HT  Rapid  Prototyping  System

HT is a high efficiency desktop rapid prototyping system, it consists of gantry frame, platform movable along  Y direction, worm extruder movable along direction X and Z, filament material feeding system, and control system. The extruder and the feeding system are driven by the same step motor. Once the external  PC sends control signal  the worm  is driven by the step motor , meanwhile, the plastic filament is fed into the extruding cylinder through a timing belt or gearsand roller mechanism. Then the plastic filament is melted by a heating rod embedded in the brass nozzle and deposited on the platform. The external PC calculates the cross section data alone Z direction of 3D model of object and the deposition path for each cross section. The deposition path data is then transferred to control system, each layer is built by the resultant motion of platform and extruder. After one layer is built, the extruder is raised a layer thickness (usually about 0.1 mm), the next layer is then build, the steps as above are repeated until the object is formed.

The Characteristics

1.  High pressure worm extruder, high form efficiency. It is possible to make  high strength plastic object.

2.  Ingenuity gantry  frame, lower driven inertia, high speed.

3.  Attachment  filament making system. End user can customize the material according to his requirement.

4.  Contour filling pattern, higher strength of formed object.

5.  Small system volume, lower noise, lower vibration.  It is suitable for office environment application.

6.  Economic system makes it possible to be widely used for various industry.

The Specifications